Ask any plant HR manager who runs a large contract workforce where their turnover happens and the answer is rarely 'evenly through the year'. It comes in the first few weeks. A batch arrives from Bihar or Odisha, trains for a few days, starts to become useful on the line — and then a third of them are gone before the first payday, some without a word. The factory sees a vacancy; the agency sends replacements; the cycle starts again. It is tempting to treat this as the nature of migrant labour and budget for it. That is a mistake, because most of the reasons a new worker walks away are predictable, and a fair number of them are inside the factory gate rather than outside it. This guide sets out the six reasons we see most often in the first thirty days, separates what the factory controls from what the agency controls, and ends with the handful of numbers worth tracking so that early attrition becomes something you manage rather than something you absorb. It draws on how deployments work in practice; it is not a study, and the specifics will differ from one site to the next.
1. What Early Attrition Actually Costs You
The invoice for a replacement worker looks the same as the invoice for the worker who left, so the cost of early attrition is easy to miss. It sits elsewhere. Every new worker spends their first days in induction and safety training rather than producing, and someone on your side — a line supervisor, an operator, a trainer — spends time teaching them. A worker who leaves in week three takes that investment with them, and the replacement needs it all over again. In the meantime the line is either short or carrying someone who does not yet know the job, which shows up as lower output, more rework and more scrap. There is also a safety cost. New hands, especially those who have never worked around industrial machinery, are the people most at risk of getting hurt, and a site with constant churn always has a large share of its workforce in that first, riskiest stretch. Finally there is the effect on the people who stay. Workers watch who leaves and why, and a line where half the new joiners disappear tells everyone on it that the job is worth leaving. None of this needs a precise figure to be worth taking seriously. It needs someone to count it.
2. Reason One: The Job Is Not the Job They Were Promised
The single most common reason a new migrant worker leaves is that what they find in Hyderabad does not match what they were told at home. The promise was made by someone — a local agent, a relative, a recruiter several links up the chain — and it was often made loosely: a figure for monthly salary that turns out to have included overtime that is not always available; 'packing work' that turns out to be loading; a day shift that turns out to rotate onto nights; free accommodation that turns out to be deducted. The worker does not distinguish between the person who misled them and the company they arrived at. They simply conclude they were cheated and go looking for something else. The fix is to put the job in writing before the worker travels, in Hindi, and to make sure it reaches the worker rather than stopping with the agent. A one-page job card should say the role, the shift pattern, how wages are calculated and roughly what they come to before and after statutory deductions, how overtime works and whether it is guaranteed (it usually is not), and what — if anything — is deducted for accommodation or food. Wages should be stated by reference to the Telangana minimum wage notification for the relevant employment, which is revised periodically, not as a round number that sounds attractive. A worker who arrives knowing what the job is rarely leaves because of it.
3. Reason Two: The Long Wait for the First Salary
Most contract deployments in Hyderabad run on a monthly wage period, and under the Code on Wages, monthly wages fall due before the seventh day of the following month. That is a sensible rule for an established workforce. For a new migrant worker it creates a hard stretch. Someone who joins on the tenth of the month is paid for those first weeks only by the seventh of the next month — close to four weeks of work before any wages, having spent most of their savings on the journey and the first rent. Many arrive with very little cash. By the third week they are borrowing from roommates, eating less, or taking calls from home asking when money will be sent. A rival contractor offering weekly payment, or a relative's offer of daily-wage work elsewhere, starts to look very attractive. The answer is not to break the wage period but to bridge the gap deliberately. A modest, documented joining advance — recovered from the first wages in instalments, since recovery of advances is among the deductions the Code on Wages permits — removes the main pressure. So does making sure the worker's bank account is open and verified in week one, so the first salary is not delayed by paperwork. What does not work is an informal advance from a supervisor's pocket, which creates exactly the kind of debt relationship you do not want on your floor. Confirm the rules on advances and their recovery with your consultant before you set a policy.
4. Reason Three: Where They Sleep and What They Eat
A worker who is sleeping badly, eating badly or spending an hour each way getting to the site will not last, however good the job is. Accommodation for migrant contract workers is usually arranged by the agency or by the workers themselves, not by the factory, and so it tends to fall outside the factory's line of sight. It should not. If your contractor is providing or arranging housing, ask to see it: how many people share a room, whether there is water and a working toilet, whether there is space and fuel to cook, and how far it is from the gate. If the contractor deducts for it, the amount should be agreed in writing before the worker arrives and appear as its own line on the wage slip — housing provided by the employer is a permitted deduction under the Code on Wages, but an unexplained one is a grievance waiting to happen. Food matters more than people expect. Workers from Bihar, UP and MP are used to a wheat-based diet and often struggle with a rice-heavy, spicier one in the first weeks; stomach trouble from new water and food is common. A canteen that offers rotis, or simply tolerates workers bringing their own food, is a small thing that a new worker notices. Where the OSH Code and the rules require the establishment to provide drinking water, latrines, a canteen or rest rooms, the thresholds and standards are set in the rules; check that your site meets them for the contract workforce as well as your own employees.
5. Reason Four: An Induction That Assumes They Understood
Many inductions are delivered in English or Telugu by someone who has given the talk a hundred times, to a group of new workers who nod because nodding is easier than admitting they did not follow. The worker then walks onto a floor where they do not know whom to ask, what they are allowed to touch, or what happens if they make a mistake. Some get hurt. Many simply feel lost and humiliated, and leave. A useful induction for a migrant workforce does four things. It is delivered in Hindi, by someone the worker will see again. It covers the practical questions a new worker actually has — where the toilet and drinking water are, when breaks are, whom to tell if they are unwell, how attendance is recorded, when and how they will be paid — not only the safety rules. It pairs each new worker with an experienced one for the first days, ideally someone who speaks their language. And it moves them onto machinery gradually rather than putting them on a press on day two because the line is short. The safety training required for your process, and the records of it, are a statutory matter as well as a retention one; our earlier post on contract worker injuries covers the factory's exposure if this goes wrong.
6. Reason Five: How They Are Treated on the Floor
Contract workers on a mixed line can tell very quickly whether they are regarded as colleagues or as temporary hands. It shows in small things: who gets the dirtiest or heaviest jobs, who is shouted at in a language they do not understand, whether they can use the same canteen and rest area as permanent staff, and whether anyone listens when they raise a problem. A new migrant worker, far from home and without a local network, feels this sharply, and the response is often not a complaint but a quiet departure. Much of this sits squarely with the factory. Your line supervisors and permanent operators set the tone, and a brief word with them before a new batch arrives — about language, about fair allocation of tasks, about not treating the newest workers as a punishment detail — costs little. The other half is a grievance route the worker will actually use. Most new workers will not walk into an HR office. They will talk to someone who speaks their language, whom they see every day, and who they believe can do something. On FactoryForce deployments that is the site supervisor, who speaks Hindi and is the first point of contact for worker concerns; whatever arrangement you use, make sure a new worker knows from day one who that person is.
7. Reason Six: The Pull From Home and From Other Sites
Some early departures have nothing to do with the job. A parent falls ill, a harvest needs hands, a wedding comes up, or the worker is simply homesick in a way that only eases after the first month. Others are pulled rather than pushed: a cousin at another site says the money is better there, or a contractor's agent turns up at the room offering a higher figure. The factory cannot stop these, but it can make the job harder to walk away from. Workers who travel and live together, from the same district or village, tend to stay together; a batch that is split across shifts and rooms loses that support. A short check-in at the end of week one and again in week two — a supervisor asking each new worker, privately and in Hindi, how it is going and whether anything is wrong — surfaces problems while they can still be fixed, and tells the worker that someone noticed them. Timing matters too: a batch that arrives two weeks before Diwali or Chhath is likely to leave for the festival and may not come back, which is worth planning around rather than discovering. And where a worker genuinely has to go home, a clear route back — leave recorded properly, a place kept for a reasonable time — turns a lost worker into a returning one.
8. What to Measure
Early attrition only becomes manageable when it is counted, and it is rarely counted well. Four numbers are worth tracking for every batch of new workers. First, thirty-day retention: of the workers who joined in a given week, how many are still on site thirty days later. Track it by batch rather than as a monthly average, so that a bad batch stands out. Second, retention by source — which agency, which vendor, which recruiting district — because if one source consistently loses half its workers in a month, the problem is usually in how they were recruited and what they were told. Third, retention by line or department, because if one line loses new workers far faster than the others, the cause is usually on that line. Fourth, days from joining to first salary credited, because it shows whether the payment gap in section 3 is being bridged or not. Alongside the numbers, capture a reason for every departure, asked in Hindi by someone the worker trusts. 'Left without informing' is not a reason; it is a sign that nobody asked in time. Reviewed monthly with your agency, these figures will tell you more about your contract workforce than any annual survey.
9. What to Ask Your Agency
An agency that supplies migrant labour should be able to answer questions about early attrition without hesitation, because it bears much of the cost of replacing workers too. Before you sign, or at your next review, ask: What do workers on my site get told about the job before they travel, and can I see it in writing, in Hindi? How do you bridge the gap between a worker's arrival and their first salary? Where will the workers stay, can I see it, and what will be deducted for it? Who on site speaks the workers' language, and how does a new worker raise a problem? Do you track thirty-day retention by batch and by recruiting source, and will you share it with me? And when a worker leaves in the first month, how quickly is a trained replacement on the line, and who carries the cost of retraining? FactoryForce places its own Hindi-speaking supervisors on site, pays workers by bank transfer, and reviews attendance and attrition with factories every month — and we would much rather a client asked these questions at the start than discovered the answers through an empty line.
Early attrition among migrant contract workers is not weather. It follows a small number of causes — a job that does not match the promise, a long wait for the first salary, poor accommodation and food, an induction nobody understood, rough treatment on the floor, and the pull of home — and the factory can influence more of them than it usually assumes. Put the job in writing, in Hindi, before the worker travels. Bridge the first month. Look at where they live. Induct them in their language, with a buddy. Make sure someone on the floor is listening. And count thirty-day retention by batch, so that the pattern is visible while there is still time to act. If you would like your current contract workforce reviewed against these points, request a quote or WhatsApp us and we will go through it with you. For any wage, deduction or facility requirement you intend to rely on, confirm the current position with the Telangana Labour Department or your labour-law consultant.
Related reading
Ready to Get Started?
Need workers for your factory?
Let's talk.
Tell us your requirement — role, quantity, site. We'll have workers on your floor within 48 hours.
Looking for work instead? हैदराबाद में काम चाहिए →