Most factories that are unhappy with their manpower contractor stay with it longer than they should, and the reason is rarely loyalty. It is the fear of what happens in the week of the switch: half the line not turning up, the old contractor walking away with unpaid wages, PF records in a mess, and an inspector later asking who was responsible for what. Those fears are reasonable, because a badly run handover can produce every one of them. A well run one produces none. This post sets out how to change contractors in an orderly way: what to read in your current agreement first, how to treat the workers who want to stay on your floor, how to make sure the outgoing contractor settles what it owes before it is paid for the last time, what has to happen with PF, ESI and the licences, and how to run the overlap itself. It is a practical guide, not legal advice, and the labour codes and Telangana's rules under them are still settling, so confirm the specifics with your labour-law consultant.
Why a switch is riskier than it looks
Changing a contractor looks like changing any other supplier: give notice, sign with someone new, carry on. The difference is that the 'supply' is a group of people whose wages, statutory dues and employment records all sit with the outgoing contractor, and whose work happens on your premises. When the relationship ends, three things can go wrong at once. Wages and dues for the final weeks can go unpaid, and the law gives the principal employer real exposure when a contractor defaults on wages. Workers can be left uncertain about whether they still have a job, which is when experienced people quietly leave for another factory. And the records that prove the workers were treated lawfully can stay in the old contractor's office, which no longer has any reason to answer your calls. None of this is a reason not to switch. It is a reason to plan the exit as carefully as you planned the original engagement, and to start before you give notice.
Read the exit terms before you say anything
Start with the agreement you already have, and read it before you mention the change to anyone. Note the notice period and how notice must be given. Check whether there is a lock-in, a minimum billing commitment or a termination fee. Look for a non-solicitation clause that tries to stop you, or the next contractor, from engaging the workers the outgoing contractor deployed; these clauses vary widely in how they are drafted and how far they can be enforced, so have your counsel read yours rather than assuming it either binds you or does not. Check what the agreement says about the return of documents and records at the end, about the final reconciliation of statutory dues, and about your right to withhold payment while dues remain unsettled. Then look at what you owe: unpaid invoices, any security deposit the contractor holds, and any retention you have been keeping. Those amounts are your main leverage for an orderly exit, so do not release them early as a goodwill gesture.
The workers are not the contractor's to hand over
Factories often talk about 'moving the workers to the new agency' as if the workforce were part of the contract. It is not. Each worker is employed by the outgoing contractor, and whether they join the incoming one is their decision. In practice most people working steadily at your site would rather keep the same job at the same place, so a good transition makes that easy for them. The incoming contractor should offer employment to the workers you want to retain, on terms that are no worse than they have now, with an appointment letter in a language they understand. Nobody should be asked to pay a joining fee, a registration charge or a 'transfer' deduction to keep doing the same job. And nobody should be told they will lose their pay for the last weeks if they move. Workers who choose not to move, or whom the incoming contractor does not take on, remain the outgoing contractor's responsibility: their final wages and dues must still be settled, and you should see proof that they were.
Make the outgoing contractor settle before its last invoice
The single most important control in a switch is simple: the outgoing contractor's final payment is released only after it has shown that every worker it deployed at your site has been paid in full. That means wages up to the last working day, credited to the workers' bank accounts, with a wage register that matches your attendance records. It means any leave encashment, bonus for the part of the accounting year worked, and other dues that the law or the agreement requires. The Code on Wages sets a short deadline for paying the wages of a worker whose employment ends, so this is not something the contractor can settle at its leisure months later; ask your consultant for the exact timeline that applies. Gratuity needs particular care. Where workers have long service at your site, possibly across more than one contractor, the question of who owes gratuity, and from when, can be genuinely difficult, and it is the kind of liability that tends to land on the principal employer if nobody else pays. Get advice on it for your specific facts before the switch, not after a claim arrives. Ask for a signed final settlement statement for each worker, sample a few of them against bank credits, and only then release the money.
PF, ESI and the records that must move
The good news is that the core statutory identities belong to the worker, not the contractor. A worker's Universal Account Number for PF stays the same when they change employer, and the incoming contractor should link them under that existing UAN rather than create a new one. The balance built up with the old contractor moves through EPFO's transfer process, which is increasingly handled online, and workers should be told plainly that they do not need to withdraw their PF just because the contractor has changed. Withdrawing it is one of the most common and most expensive mistakes a worker makes during a switch. ESI works similarly: a worker's insurance number stays with them, and the new employer registers them under it. What must not happen is a gap. The outgoing contractor must remit PF and ESI for every worker up to the last day, and you should see the remittance proof that shows individual names, not just a total. The incoming contractor must register the workers it takes on from their first day. For the records themselves, the outgoing contractor should give you, or keep available to you for the period the law requires, the registers, attendance, wage and remittance records for your site, because an inspector asking about last year will still ask you.
The paperwork on the factory's side
A switch changes your own statutory paperwork too, and it is easy to forget because the factory is not changing anything about the work. If your establishment is registered as a principal employer for contract labour, the registration lists the contractors working at your site, so it may need to be amended when one leaves and another arrives. Check that the incoming contractor holds whatever licence applies to the number of workers it will deploy at your site; the OSH Code sets the licensing threshold at fifty contract workers, and how that interacts with licences issued under the older Contract Labour Act is something to confirm with your consultant. Make sure the nature of the work in the new agreement matches what the workers will actually do, since the question of core and non-core activity does not go away because the contractor has changed. Update your own contractor file, the gate passes and access records, and the attendance system so that no worker is recorded under the wrong contractor for even a day. Finally, keep a short written note of the transition itself: dates, who moved, who left, and what was settled. It is the document you will want first if anyone asks questions later.
Running the overlap without stopping the line
The operational risk is concentrated in a few days, and it shrinks a great deal with a short overlap. Give the incoming contractor time before the changeover date to meet the workers, collect documents, open or confirm bank details and issue appointment letters, so that day one is not spent on paperwork. Fix the changeover date so that it does not fall in a peak production week, or immediately before a festival when many migrant workers travel home. Ask the incoming contractor to place its supervisor on site during the overlap, alongside the outgoing one, and make sure your own shift in-charges know who to call for what. Keep the pay date and the pay cycle the same if you possibly can; a worker who has been paid on the seventh of every month for two years will treat a change to the twentieth as a warning sign. And plan the explanation to the floor. Workers will hear about the switch from rumour before they hear it officially, so tell them early, in their own language, what is changing and what is not: same site, same work, same rate or better, PF and ESI numbers unchanged, and final wages from the old contractor paid by a stated date. Put a name and a phone number against each of those promises.
What to ask the incoming agency before you sign
The time to test a new contractor is before the switch, not during it. Ask how they would run the transition at your site, step by step, and who on their side would own it. Ask how they will register existing workers under their current UAN and ESI numbers, and how quickly. Ask what they will charge workers to join, and expect the answer to be nothing. Ask to see a redacted sample of a wage register and a PF remittance proof showing individual workers, and notice how easily it appears. Ask how they handle workers from other states, including accommodation and travel home. Ask what their own exit terms look like, because the clauses that make leaving them easy or hard are the ones you will care about in a few years. And write the transition into the new agreement itself: the obligation to offer employment to the workers you name, on terms no worse than their current ones, the timelines for registration and the first pay date, and the same right to withhold payment against unsettled statutory dues that you wished you had last time.
A contractor switch goes wrong when it is treated as a commercial decision only. Read your exit terms first, hold the outgoing contractor's last payment until every worker's wages and dues are shown to be settled, keep each worker's PF and ESI identity unbroken, update your own registration and records, and give the floor a clear, early explanation with names attached. Do that, and most workers will simply carry on working. If you are reviewing your current manpower arrangements or thinking about a change, FactoryForce can walk you through how a transition to us would be handled at your site; request a quote or reach us on WhatsApp. Wage payment deadlines, gratuity rules, licensing thresholds, registration requirements and the PF and ESI transfer processes are set by statute, notification and the authorities' own procedures and change over time, so confirm current requirements with your labour-law consultant before relying on anything here.
Related reading
Ready to Get Started?
Need workers for your factory?
Let's talk.
Tell us your requirement — role, quantity, site. We'll have workers on your floor within 48 hours.
Looking for work instead? हैदराबाद में काम चाहिए →